plastic type moulding temperature controller heating machine from China manufacturer

plastic type moulding temperature controller heating machine

Payment Terms:	T/T,L/C
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: JH110

Production Capacity: 30sets/month

Delivery Date: 40 Days

Opening force (mm): 64.3

Max.mould hight(mm): 760

Ejector number (pc): 5

Ejector stroke (mm): 150

Means of Transport: Ocean

Packing: General Packing

Camp force(KN): 1100

Soace between tie bars(mm): 470x420

Min.mould height(mm): 200

Ejector force (KN): 59.3

110 ton high precision direct clamping injection molding machine

Hydraykuc System

Rexroth valves are to ensure quick response and high precision.Plus optional MOOG or Rexroth servo valve,your desire of perfect molding becomes true.

Injection Unit

The intergrated double drive cylinder injection system with symmetrical oil circuit can ensure the injection stable and precise.weldless oil circuit provides high speed and high pressure.Linear guide bearings control friction within the minimum resistance.

Direct Clamping System

Patented direct clamping system,distinguished as high pressure,efficient,and energy saving,can realize 680 mm/sec.fast mould close/open and perfect low pressure mould protection.

Platen Design

Advanced platen design,big platen space&stroke and European standard platen screw hole,can satisfy your various needs.Mininal platen distortion tolerance ensures perfect molding.

INJECTION UNIT		JH 110
Screw specification		A	B	C	D
Screw diameter (mm)		28	32	36	40
Screw stroke (mm)		175	175	175	175
Screw L:D(L/D)		24	23	20.5	18
Shot volume (cm³)		108	141	178	220
Injection rate(g)		97	127	160	198
Ⅱ	Injection pressure(Mpa)	305	234	185	150
	Dwell pressure(kgf/cm²)	3115	2385	1884	1526
	Injection speed(mm/sec)	193	190	190	190
	Injection rate(cm³/sec)	118.8	152.7	193.3	238.6
	Screw rotate speed (rpm)	285	285	285	285
Ⅲ	Injection pressure(Mpa)	261	200	158	128
	Dwell pressure(kgf/cm²)	2664	2040	1611	1305
	Injection speed(mm/sec)	226	220	220	220
	Injection rate(cm³/sec)	138.9	176.8	223.8	276.3
	Screw rotate speed (rpm)	285	285	285	285
Nozzle sealing force(KN)		23.1
Nozzle advance stroke(mm)		50
Heater power (KW)		7.5
CLAMPING UNIT
Clamp force (KN)		1100
Opening force (KN)		64.3
Platen stroke (mm)		560
Space between tie bars(mm)		470x420
Max.mold height(mm)		760
Min.mold height(mm)		200
Ejector number(pc)		5
Ejector force (KN)		59.3
Ejector stroke(mm)		150
OTHERS
Special pump pressure(Mpa)		25
Standard pump pressure(Mpa)		21
Machine dimensions(LxWxH) m		15
Pump motor power(KW)		5.0x1.15x1.80
Machine weight(T)		5.4
Oil tank capacity(L)		225

	A	B	C	D	E	F	G	a	b	c	d	e	f
JH110	560	200	50	330	125	3	10	4500	5000	2000	1100	1800	70

110 ton high precision direct clamping injection molding machine

Injection molding machine, the oil temperature too high oil temperature is not normal to rise may be cooling system is not normal or hydraulic components during operation of high fever caused by.

1, a cooling system is not norm
(1) cooling system supply, such as water valves not fully open, insufficient water pressure or water pump flow does not meet the need.

(2) pipeline blockage, such as filter, cooling tower or water mains plug.

(3) the cooling water temperature is too high, such as the cooling tower cooling capacity is insufficient, or damage or the temperature too high.2, the hydraulic system produces high fever

(1) the pump is damaged, the internal parts wear generate heat when rotating at high speed. (2) pressure regulation is not appropriate, the hydraulic system long-term at high pressure and overheating.),

(3) the hydraulic element internal leakage, such as valve damage or damaging the sealing ring to generate heat to high pressure oil flows through the small space

Injection molding machine, injection molding machine or injection machine. It is the main forming equipment plastic products, thermoplastic or thermosetting plastics using plastic molding into various shapes. Divided into vertical, horizontal, all electric. The function of heating plastic injection, high voltage is applied to the molten plastic, so that the injection and full of mold cavity

Welcome to my company contact information